中文| Русский
Home > News > News Details
Build LED Panel Light Panel - You Can Do It From:http://www.lgiled.com   Reporter:   Date:2012/11/27 11:39:20   Tags:buy-led-panel-light led-panel-light-kit ed-panel-light-suppliers

Led panel light is very popular among consumers both at home and abroad. There are various kinds of led panel lights both in domestic and international markets for your selection. Also, the panels are different from their sizes, colors, shapes and so on. Generally speaking, the panels can be found and bought directly from stores both in domestic and international markets. However, you can build the panels by yourself after you seeing the introduction below. Generally, a led light panel is regarded as a lighting source made of flat sheet with light created by light emitting diodes. And the light is spreaded evenly through the panel's light distribution system. And the led light panels can be applied for under-shelf or under-cabinetry lighting, for retail displays and signage, as office lights in drop ceiling. It can be used to improve both indoor and outdoor look to make your house or office more elegant.

In order to accomplish your task of building the led panel, there are some things that you will need, like led bulbs, panel, portable drill, drill bit, hot glue gun and glue, soldering iron and lead, converter, male plug, single pole single throw switch and so forth. Hope that the simple steps below can help you.

First of all, you should prepare the basic materials, like panel board, led bulbs and the other materials as we have introduced above. These kinds of materials can be found easily in common stores both in domestic and international markets.

Second, what should you do is to mark holes. About 50 holes of 5 rows and 10 holes each in the panel. You are advised to leave a 4 inch space around the outer perimeter of the panel. There must be 3 inches distance between led bulbs. In order to design the led panel better, you are advised to take consideration of the size of the panel board.

Third, you should use a hole drill to drill holes according to the marks created by the use of drill. You'd better do it in accordance with the proper distance each hole with the corresponding led bulbs' diameters for a better fit. Then you should install your bulbs. Plug bulbs to the panel tightly for safety.

Then, tap the paralleled led bulbs to power supply. LED bulbs need a direct current supply while the input supply of converter is alternating current. Then install a single pole single throw switch to the cord of the converter's input supply. Last but not least, what should you do is to connect the plug to alternating current power source.

Previous: Instructions on Wiring LED Downlight i... Next: How to Deal With The Buzzing LED Dow...

Related News