中文| Русский
Home > News > News Details
Do You Know How to Install LED Light? From:http://www.lgiled.com   Reporter:   Date:2013/9/15 15:10:08   Tags:lambda-power-supply trouble-light led-rgb-module

LED lights, like led downlights, have been widely used for lighting and it has been used to replace the traditional light bulbs in the house for illuminating rooms. LED lights can be installed in various places, like kitchen cabinet and it is more energy efficient than a standard incandescent light. Before installing your LED lights, you firstly should know where should you place it.

Step 1
Prepare things you will require, like screwdriver, power drill, voltage tester, wire cutters and so forth.

Step 2
Make a mark to ensure you know where the electrical wiring needs to be located.

Step 3
Choose where to place the electrical source for the led downlight. The electrical source is typically located within a kitchen cabinet. Then, you should drill small pilot holes in the underside of the cabinet to see where the wiring will need to go.

Step 4
Locate the circuit to use for the LED lighting on your home's junction or circuit box and turn off the circuit.

Step 5
Feed the electrical wire from your basement junction through the floor, up to the cabinet. Connect the electrical wire from the lighting source to the LED lighting. You should refer to the led lighting instructions to properly connect the electrical wiring.

Step 6
You should connect the ground wires from the electrical source for the LED lights to the switch box and turn on the circuit to test the lighting.

Previous: Advantages of LED Downlight Attract t... Next: LED Downlight Have a Few Good Featur...

Related News