中文| Русский
Home > News > News Details
Tips on Removing the Ballast for LED Tube Lights From:http://www.lgiled.com   Reporter:   Date:2013/9/27 21:17:39   Tags:diode-module led-wholesalers track-lights-led

Now, LED lights, like led downlights, are becoming more and more popular for home with the development of energy efficiency. LED lights can provide light far more than ordinary incandescent lamp. However,Its cost is only a small part of the cost of ordinary incandescent lamp. How to eliminate the ballast for LED lamp is also more and more attention because of the widespread use of LED lamps. Under normal circumstances, Replacing or rewiring an LED tube light can sometimes require removal of the ballast that holds the cabling for the light. And, Removal is fairly simple and requires only a few short steps.
 

Mainly in the following steps

 

First, Unhook the power running into the light fixture. Than, attempting to remove the ballast or any other part of the fixture.

 

Second, Put on a pair of insulated gloves and remove the covering from the light fixture.

 

Third, Unscrew existing bulb or tube light and place it aside in a safe place.

 

Fourth, Positioning of the ballast on the fixture. The ballast in a tube light is often located on the far end,but is sometimes more centrally located.

 

Fifth, Clip the wires that are attached to the ballast carefully, leaving a good amount of excess, and then look for the fastening screws that hold the ballast in place.

 

Last, Unscrew fasteners that are holding the ballast in place to finish the removal process. Some ballasts may be clipped into place, requiring no tools to remove. If this is the case for your ballast, just slide it in the opposite direction of the clips to remove it.

Previous: Differences Between LED lamp and Fluor... Next: Residential LED Panel Light Is Popula...

Related News