中文| Русский
Home > News > News Details
Do Maintenance of the LED Panel Light to Extend Its Life From:www.lgiled.com   Reporter:Vivianus   Date:2013/10/4 12:08:01   Tags:

The maintenance of led panel light can be done to extend its life and make it more bright. There are many other types lights available that you should choose the suitable one. There are several tips for you to know. As our life has been improved a lot, the ways are important for you to live a comfortable and easy life.

First, buy lamps, the first not busy installing, you should carefully read the luminaire mark and read installation manual and press the instructions of the installation, the use of lighting, or they may be dangerous.

Secondly, according to the source parameter flag provides timely replacement of the aging of the lamp and found the tube ends redness, lamp black, or a shadow, when the lamp is not lit jump, the lamp should be replaced, to prevent ballast burnout insecurity. During the process, the structure of it is not suggested to change. So it is not a job that be done often.

Finally, the lamps in use but also to strengthen maintenance in order to prolong its life. Particular attention to the following points: the room lamp should always use a dry cloth, and pay attention to prevent moisture intrusion, {HotTag} appeared a long time in order to avoid corrosion damage or leakage circuit phenomenon; installed in the toilet, the bathroom lights shall be fitted with damp shade, otherwise it will greatly reduce the life; installed in the kitchen of the lights should pay particular attention to anti-smoke, because the accumulation of grease will affect lamp illumination; pale shade light transmission is good, but easy to stick dust, to diligent cleaning, so as not to affect the light transmittance; lamps if non-metallic, wipe with a damp cloth to prevent dust accumulation, obstruct lighting effects.

In addition, experts also advise using led panel light and led downlight lamps try not frequently switch because the lamps in frequent start the moment, the current through the filament is greater than the normal work of the current, making the filament temperature rise sharply accelerated sublimation, which will greatly reduce its use life, so to minimize the lamp switch. More information, visit www.lgiled.com

Previous: The Purpose of LED Panel Light Mainte... Next: Ten Considerations About Using the LE...

Related News